Tiny DIY Knife from Hacksaw Blade

A lifetime ago I was really into Locksport and in particular into making manual tools and picks, I'd often use hacksaw blades as a cheap stock of very hard decent steel. I've also always wanted to tinker with knife making and today the synapses all fired at once and I made this.

 

 Starting with a small length of hacksaw blade I made a crude drawing on some card, cut it out and glued it to the stock. Ages ago I bought one of those tiny, cheap, yet surprisingly useful 12V belt grinders. I could do with making some jigs/holding to make my bevels absolutely correct but for half an hour of off hand grinding it's not the worst for a first attempt.

 

I ground out the original hole to accomodate the little piece of brass tubing I'd found and I also ground a hole (this steel is incredibly hard to drill unless you temper it and re harden) and throughout the grinding I kept cooling the blade in water so it didn't lose it's hardness. 

 

Then a super quick little bit of design work in FreeCAD and some 3D printing it was time to assemble. The scales are printed in PETG and I've used some epoxy resin to hold it all together. Despite my grinding it's wicked sharp so I deffo need to come up with a small sheath. Finished off with a small lanyard it's been a good fun little project and it's possibly inspired me to look for a larger piece of steel for further attempts! 

 

SOURCE Issue 1 out now! Computational Fluid Dynamics

 I've been tinkering on two things a lot for the last couple of months. One has been an odyssey into learning Computational Fluid Dynamics using the amazing CfdOF FreeCAD add on workbench. The second is I've been wanting to, for a long time, learn some kind of opensource tool for page layout/design.

 In an effort to create a commitment to this learning I've decided to launch something called "SOURCE". SOURCE is a little home for me to place longer tutorial content that's beyond what my amazing paying clients would want. I'm aiming to bring one out every quarter (the observant will note issue one is marked as June 2025 so I've given myself and extra few weeks for Issue 2)!

 It's opensource, it's made in Scribus and the archive for this issue can be found on Github here under a CC-BY-NC v4.0 license. It's free... or it's pay what you feel! There are donation links in the PDF for Paypal or KoFi, it's a HUGE amount of work even for this first 11 page experimental issue so any donations will help me keep assigning hours to it. I plan to have larger and more varied content in upcoming issues. Finally... do share it! I'd love it to be decentralised and disseminated far and wide... send the PDF in email (compression may help), host it somewhere, seed it, whatever! Download SOURCE Issue 1 here.

Picocalc, Having fun with PicoMite!

 

So I am a sucker for portable tech. In fact as well as a heap of old Palm PDA's I own things like a Pocketchip and indeed every portable so far released by ClockworkPi. So the latest offering from them, Picocalc was always going to be on my desk too!

It's a fun platform and I think I can really see it getting some traction over the next few years as it's already been hacked around on a lot by the community and it's available for $75. AND, wonderfully, it arrived after a few weeks, much better than my pay now wait 18 months for my Uconsole! 

So what is it.. well, It's a Pico compatible handheld that ships with a Pico on board flashed with PicoMite which is essentially a port of MMBasic. Assembly is gorgeous with superb instructions and the build quality is high and typical of ClockworkPi products. It's got a nice screen and you can power it from one or two 18650 cells. 

The keyboard has a click but it's pretty nice to use and feels like a spacious thumb-board. You can do a stack on it and it doesn't get to wearing! Oh and the keyboard is back-lit with two brightness levels so it's pretty lovely to work on in low light. 

Over on the forum there is LOADS going on with this. There's already lots of different bits and bobs ported to it, Micropython, Lua, Lisp and more. And that's just with the onboard Pico. Tantalisingly (and I have one on my desk for when I get to it) it's possible to insert a Luckfox Lyra board which can run full Linux environments, there's a really active thread where this is being developed very quickly, loads of game emulators, people working on getting WiFi adaptors up and running and more. Amazing. 

For me in the week or so since I built mine I've just been tinkering with it in Basic mode, I'm mucking about relearning basic and slowly working on a little suite of calculator scripts for useful things for me (descent rate calculators, parachute design stuff etc). It's such a nice object to tinker on and feels cool to be working with older languages like Basic whilst having modern stuff like a vacuous SD card to save stuff too!